Contents |
Solved.
ASUS P5Q PRO does not work with two IDE devices.
Turn "Marvell IDE Boot ROM" in the BIOS settings enabled.
# cat /var/log/messages
...
pata_marvell 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16'
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
input: PC Speaker as /devices/platform/pcspkr/input/input8
ata5.00: ATAPI: PIONEER DVD/CDRW DCR-111, 1.26, max UDMA/33
ata5.00: configured for UDMA/33
nvidia: module license 'NVIDIA' taints kernel.
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for UDMA/33
ata5: EH complete
ata5.00: limiting speed to UDMA/25:PIO4
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: model number mismatch 'PIONEER DVD/CDRW DCR-111' != 'A@E^E'
ata5.00: revalidation failed (errno=-19)
ata5.00: limiting speed to UDMA/25:PIO3
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: P 2.6.27.5-117.fc10.x86_64 #1
Call Trace:
<IRQ> [<ffffffff8108320f>] __report_bad_irq+0x38/0x7c
[<ffffffff8108345b>] note_interrupt+0x208/0x26d
[<ffffffff81083b88>] handle_fasteoi_irq+0xbb/0xeb
[<ffffffff8101309e>] do_IRQ+0xf7/0x169
[<ffffffff81010933>] ret_from_intr+0x0/0x2e
<EOI> [<ffffffff81017375>] ? mwait_idle+0x3e/0x4f
[<ffffffff8101736c>] ? mwait_idle+0x35/0x4f
[<ffffffff8100f279>] ? cpu_idle+0xb2/0x10b
[<ffffffff8131ed7d>] ? rest_init+0x61/0x63
handlers:
[<ffffffff8123ae36>] (usb_hcd_irq+0x0/0xb3)
[<ffffffff81224205>] (ata_sff_interrupt+0x0/0xc2)
Disabling IRQ #16
ata5: soft resetting link
ata5.00: revalidation failed (errno=-2)
ata5.00: disabled
ata5: soft resetting link
ata5: EH complete
# dmesg ... pata_marvell 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:04:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 input: PC Speaker as /devices/platform/pcspkr/input/input8 ata7.00: ATAPI: IDE5232CO, VER 0048, max UDMA/66 ata7.00: limited to UDMA/33 due to 40-wire cable ata7.00: configured for UDMA/33 ata8.00: ATA-7: Config Disk 0, 1.2569, max MWDMA2 ata8.00: 16777215 sectors, multi 1: LBA ata8.00: configured for MWDMA2 scsi 6:0:0:0: CD-ROM COMBO IDE5232CO 0048 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 78x/78x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg4 type 5 scsi 7:0:0:0: Direct-Access ATA Config Disk 0 1.25 PQ: 0 ANSI: 5 sd 7:0:0:0: [sde] 16777215 512-byte hardware sectors (8590 MB) sd 7:0:0:0: [sde] Write Protect is off sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sde] 16777215 512-byte hardware sectors (8590 MB) sd 7:0:0:0: [sde] Write Protect is off sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sde: unknown partition table sd 7:0:0:0: [sde] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg5 type 0 # fdisk -l ... Disk /dev/sde: 8589 MB, 8589934080 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Disk /dev/sde doesn't contain a valid partition table # dd if=/dev/sde count=1 | od -c 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.000857648 s, 597 kB/s 0000000 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0001000
# dmesg ... pata_marvell 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:04:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 input: PC Speaker as /devices/platform/pcspkr/input/input8 ata7.00: ATAPI: IDE5232CO, VER 0048, max UDMA/66 ata7.01: ATAPI: PIONEER DVD/CDRW DCR-111, 1.26, max UDMA/33 ata7.00: configured for UDMA/66 ata7.01: configured for UDMA/33 scsi 6:0:0:0: CD-ROM COMBO IDE5232CO 0048 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 78x/78x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg4 type 5 scsi 6:0:1:0: CD-ROM PIONEER DVD/CDRW DCR-111 1.26 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 40x/94x writer cd/rw xa/form2 cdda tray sr 6:0:1:0: Attached scsi CD-ROM sr1 sr 6:0:1:0: Attached scsi generic sg5 type 5 # ls -l /dev/dvd lrwxrwxrwx 1 root root 3 2011-01-16 05:27 /dev/dvd -> sr0 # ls -l /dev/sr* brw-rw----+ 1 root disk 11, 0 2011-01-16 05:27 /dev/sr0 brw-rw----+ 1 root disk 11, 1 2011-01-16 05:27 /dev/sr1